Table 1.53 Display Of [Mmb#X] Window / Setting Items - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.2 [System] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E

TABLE 1.53 Display of [MMB#x] Window / setting items

Items
Status
Role
Part Number
Serial Number
MAC User port
address
Maintenance
Port
Firmware Version
Location LED
Reset MMB
Switch Over to MMB
Enable/Disable
Voltage
Sensor
Voltage
Threshold Warning
(Low/High)
Critical
(Low/High)
Displays the status of the MMB.

OK

Not-present

Warning

Degraded

Failed
Displays the operation status of the MMB.

Active

Standby

Disabled
Displays part number of the MMB.
Displays the serial number of the MMB.
Displays MAC address of the MMB management port.
00:00:00:00:00:00
Displays MAC address of the MMB port.
00:00:00:00:00:00
Displays the version of the MMB firmware.
Displays the status of the Location LED.
The following are the various display status.

On: During power on.

Off: During power off
On/ Off of the Location LED can be controlled by clicking [On], [Off] buttons.
Resets the MMB if this check box is checked.
When this check box is checked, [Switch Over to MMB] mentioned below cannot
be set.
Switches the Active/Standby of the MMB if this check box is checked.
When this check box is checked, [Reset MMB] mentioned above cannot be set.
Remarks
This check box is displayed only, when two MMBs are mounted.
Controls Enable/ Disable of the MMB.
Because this item is a facility used for testing, it is not possible to usually set it.
Displays the Voltage sensor type.
P3.3VL
P1.5VL
P1.5VL_CPLD
P1.2VL
P1.0VL
P0.75VL
Displays the current power voltage.
Lower and upper limits of the warning-level voltage.
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.
Lower and upper limits of the critical-level voltage.
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.
138
Description
CA92344-0539-04