Looking For The Mac Address Of A Lan Controller - Fujitsu PRIMERGY GX2560 M7 Upgrade And Maintenance Manual

Figure 62: Progress bar (RAID array rebuild)
CAUTION
The system is now operational, however, data redundancy will not be
available until the RAID array rebuild is complete. Depending on the
HDD capacity the overall process can take up to several hours, in some
cases even days.
You may notice a slight performance impact during rebuild.
5.2.8

Looking for the MAC address of a LAN controller

The customer needs to know the new address of the controller:
● When replacing the system board with an onboard LAN controller
● When adding or replacing a network controller
Different controllers send different addresses:
● LAN controller: MAC (Media Access Control) address
When replacing a network controller, the MAC (Media Access Control) address
will change.
There are several possible locations where these addresses can be found.
GX2560 M7 Upgrade and Maintenance Manual
Basic software procedures
99