Existing Xcp Firmware Versions And Support Information - Fujitsu SPARC Enterprise M3000 Product Notes

Existing XCP Firmware Versions and
Support Information
The following lists the XCP firmware versions that have previously been released for
the SPARC Enterprise series, as well as the main support and update information for
each version. For the support information for XCP 1113 or earlier, see the "What's
New Information" of each version's Product Notes.
TABLE 1-3
XCP Version
XCP 1121
XCP 1120
XCP 1119
XCP 1118
XCP 1117
XCP 1116
XCP1115
XCP1114
* If this fix is not applied, the cause of the occurrence of an XSCF watchdog timeout may not be identifiable.
Previous XCP Version Releases and Support Information
Main Support Information
• Improvement of XCP firmware defects.
• Improvement of XCP firmware defects.
• Security fixes.
Security fixes.
Improvement of XCP firmware defects.
Enhancement of the investigation information at the time of the
occurrence of "XSCF process down detected"
• Support of the -b option of the sethttps(8) command.
• Enhancement of the diagnostic function for the "FMEM checksum
error" event.
• Support of the forcerebootxscf(8) command
• Enhancement of file check and other XSCF diagnostic information
• Enhancement of the investigation information at the time of occurrence
of an XSCF watchdog timeout *
Chapter 1 Software Requirements 5