Output of the show components Command Showing Disabled Components (Continued)
CODE EXAMPLE:
/SYS/MB/PCIE2/
/SYS/MB/PCIE5/
/SYS/MB/NET0
/SYS/MB/NET1
/SYS/MB/NET2
/SYS/MB/NET3
/SYS/MB/PCIE
▼ Display Individual Component Information With
the ILOM show Command
Use the show command to display information about individual components in the
server.
●
At the -> prompt, enter the show command.
In
used to get information about a memory module (FB-DIMM).
CODE EXAMPLE:
-> show /SYS/MB/CPU0/CMP0/BR1/CH0/D0
/SYS/MB/CPU0/CMP0/BR1/CH0/D0
| component_state
| component_state
| component_state
| component_state
| component_state
| component_state
| component_state
CODE EXAMPLE: show Command Output on page
show Command Output
Targets:
R0
R1
SEEPROM
SERVICE
PRSNT
T_AMB
Properties:
type = DIMM
component_state = Enabled
fru_name = 1024MB DDR2 SDRAM FB-DIMM 333 (PC2 5300)
fru_description = FBDIMM 1024 Mbyte
fru_manufacturer = Micron Technology
fru_version = FFFFFF
fru_part_number = 18HF12872FD667D6D4
fru_serial_number = d81813ce
fault_state = OK
clear_fault_action = (none)
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
25, the show command is
Managing Faults
25