Commands For Display - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations

2.3 Commands for Display

2.3 Commands for Display
Command for displaying the information is as follows.
2.3.1 show access_control
2.3.2 show active_mmb
2.3.3 show date
2.3.4 show exit_code
2.3.5 show partition configuration
2.3.6 show partition dynamic_reconfiguration
2.3.7 show partition home
2.3.8 show partition lan_device_mode
2.3.9 show partition name
2.3.10 show partition memory_mirror_ras_mode
2.3.11 show partition memory_operation_mode
2.3.12 show partition pci_address_mode
2.3.13 show timezone
2.3.14 show gateway
2.3.15 show gateway_ipv6
2.3.16 show http
2.3.17 show http_port
2.3.18 show https
2.3.19 show https_port
2.3.20 show ip
2.3.21 show ipv6
2.3.22 show hostname
2.3.23 show maintenance_ip
2.3.24 show ssh
2.3.25 show ssh_port
2.3.26 show telnet
2.3.27 show telnet_port
2.3.28 show network
2.3.29 show ntpq
2.3.30 who
2.3.31 help
2.3.32 netck traceroute
2.3.33 netck arptbl
2.3.34 netck arping
2.3.35 netck ifconfig
2.3.36 netck stat
2.3.37 show dynamic_reconfiguration status
2.3.38 show partition extended_partitioning_mode
2.3.39 show partition dimm_excl_mode
2.3.40 show partition skt_binding_mode
2.3.41 show extended_partition configuration
2.3.42 show partition status
2.3.43 show partition extended_socket_mode
2.3.44 show partition extended_socket_zone
2.3.45 show partition memory_sparing_mode
2.3.46 show raid adapter
2.3.47 show raid disk_enclosure
2.3.48 show raid physical_drive
2.3.49 show raid physical_drive_count
2.3.50 show raid logical_drive
2.3.51 show raid logical_drive_count
2.3.52 show raid bbu
435
CA92344-0539-04