Lcn Port Commands - Fujitsu 1FINITY L100 User Manual

238
System Administration

LCN Port Commands

6.12
LCN Port Commands
Note: The LCN port can have only one address at a time.
Note: When a new LCN IP address is entered, the address that is already on the LCN must be deleted before the
changes are committed.
Set LCN
This command provisions IPv4 or IPv6 address interface for LCN port.
Command:
% set interfaces interface <interface> <ipv4 | ipv6> <enabled> forwarding <packet-
forwarding> <true | false> address <ipv4-address | ipv6-address> prefix-length
<prefix-length>
Delete LCN
This command deletes the IP address interface for LCN port.
Command:
% delete interfaces <interface> <ipv4-address | ipv6-address>
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021