Set Ip - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.22 set ip

Sets <IP address>, <netmask>,for management LAN interface.
Sets virtual IP address of MMB connected in Serial.
Sets point of default is 0.0.0.0.

Privilege: Administrator
(1) Input format
set ip <ip address> <netmask>
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified IP address is invalid.
The specified netmask is invalid.
The specified IP address is duplicated.
The specified IP address is loopback address.
Unable to execute this command on standby MMB.
The specified MMB IP address is duplicated.(Console IP Address)
377
CA92344-0539-04