Set Http_Port; Set Https - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB CLI (Command Line Interface) Operations
(2)
Option
None
(3)
Usage example
None
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Unable to execute this command on a standby MMB.
2.2.19 set http_port
Sets a port accepting HTTP session.8081 is the default.
The specifiable port numbers in <port> are in the range of 1024~65535, 80 is the standard port.
Privilege: Administrator
(1)
Input format
Set http_port <port>
(2)
Option
None
(3)
Usage example
None
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
2.2.20 set https
Sets enable/disable the HTTP server.
Default value set is disable (http disabled).
Privilege: Administrator
(1)
Input format
Set https [enable | disable]
(2)
Option
None
Advertisement
Table of Contents
