Creating A Disk For System Recovery; Creating The Automated System Recovery (Asr) Set For Windows Server 2003 And Windows Server 2003 X64 - Fujitsu Primergy RX100 S3 User Manual

5.2 Creating a Disk for System
Recovery
When the installation of the OS is completed, create the system recovery disk.
If system files, system configuration, environment setting changes at startup, etc.,are damaged, such
data can be reconstructed using the recovery information stored in the created system recovery disk.
To create a recovery disk, you need an unused formatted floppy disk. Prepare it in advance.
5.2.1 Creating the Automated System Recovery (ASR) Set
for Windows Server 2003 and Windows Server 2003
x64
After setting up Windows Server 2003, create a system recovery set. To do this, you need an unused
formatted floppy disk and a medium to store back up files.
1
Click [Start] → [All Programs] → [Accessories] → [System Tool] → [Backup].
The [Backup or Recovery Wizard] window appears.
2
Click [Next].
The [Backup or Recovery] window appears.
3
Select [Create a backup of files and settings], and then click [Next].
The [Items to Create Backups] window appears.
4
Select [All the information in this computer], and then click [Next].
The [Backup Type, Destination and Name of the Backup File] window appears.
5
Specify name and destination of the backup file, and then click [Next].
The [Backup or Recovery Wizard Complete] window appears.
6
Click [Finish].
Backup process starts.
7
If a message prompts you to insert a floppy disk, insert the floppy disk and click
[OK].
Automated system recovery disk is created.
PRIMERGY RX100 S3 User's Guide
5
143