Set - Fujitsu PRIMERGY BX600 Reference Manual

4. Basic Commands

4.5. set

Command
set
Description
This command sets the given property with the given value. These values will be persistent
unless the user performs an OEMSEEraseConfiguration command in SM-CLP or clears the
configuration in iSCSISelect. Any exception to this will be listed in the help. Set command
will fail on read-only properties.
Syntax
set [common_options] [SM-CLP target] [< property > ] = [< value > ]
Options
[common_options]
Parameter Description
SM-CLP Optional input that indicates the SM-CLP target group for the given command. This
target overrides the current group. ".." indcates parent group. "/" indicates root group.
The property to be set. Type "show -d properties -l all" at the root group to get a list of all
< property >
properties. Type "show -d properties" to see properties within current group only.
The value is specific to the given command. Please type "help [property]" for applicable
< value >
values.
Required Parameters
None
Optional Parameters
None
Possible Error Messages
Common Error Messages
Read only property
4.5. set
22