Set Https; Set Https_Port - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.20 set https

Sets enable/disable the HTTP server.
Default value set is disable (http disabled).

Privilege: Administrator
(1) Input format
Set https [enable | disable]
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
Unable to execute this command on a standby MMB.

2.2.21 set https_port

Sets a port accepting HTTPS messages.432 is the default.
432, 1024~65535 are specifiable port numbers by <port>, 443 is the standard port.

Privilege: Administrator
(1) Input format
Set https_port <port>
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
376
CA92344-0539-04