Show Banner Motd - D-Link DWS-1008 Cli Reference Manual

Usage: Entering set system name with no string resets the system name to the
factory default.
To view the system name string, type the show system command.
Examples: The following example sets the system name to a name that identifies the DWS
switch:
DWS-1008# set system name DWS-bldg3
success: change accepted.
DWS-1008-bldg3#
See Also:
• clear system
• set prompt
• set system contact
• set system location
• show system

show banner motd

Shows the banner that was configured with the set banner motd command.
Syntax: show banner motd
Defaults: None.
Access: Enabled.
Examples: To display the banner with the message of the day, type the following command:
DWS-1008# show banner motd
hello world
See Also:
• clear banner motd
D-Link DWS-1008 CLI Manual 8