7.3. Setup in OSD: <F1>
Pressing <F1> in the OSD main menu brings up a list of basic settings. You
may use the <Up> and <Down> arrow keys to select the item from the list
that you want to change, and use the <Left> or <Right> arrow key to
change that setting. Press <ESC> to exit and save your settings.
7.3.1. Scan Mode
Select:
Only scan the channels marked with an S in the STA column in the
OSD main menu.
PC ON:
Scan all active channels.
7.3.2. Scan Time
The default scan time is 5 seconds. The scan time can be increased by 5
second increments up to a maximum of 90 seconds.
7.3.3. Banner Time
The default banner display time is 5 seconds. This can be changed to 10
seconds, 15 seconds or always on (∞).
7.3.4. Position
Menu:
Use the four arrow keys to move the OSD main menu into the desired
position. Press <ESC> to save the changes to the menu position.
Figure 19: OSD Setup
23