D-Link DWS-1008 Cli Reference Manual page 422

To show information only for Distributed APs that have active connections, use the show dap
connection command.
Examples: To show information only for Distributed APs that have active connections, use the
show dap connection command.
DWS-1008# show dap global
Total number of entries: 8
DAP Serial Id
1 11223344
- 11223344
2 332211
- 332211
7 0332210018 10.3.8.111
- 0332210018 10.4.3.2
8 0321250012 10.3.8.111
- 0321250012 10.4.3.2
The following table describes the fields in the display:
Field
DAP
Serial Id
DAP IP Address
Bias
D-Link DWS-1008 CLI Manual
DWS-1008 IP Address
10.8.8.111
10.4.3.2
10.3.8.111
10.4.3.2
Connection ID you assigned to the Distributed AP.
Note: DAP numbers are listed only for Distributed APs configured
on this DWS-1008. If the field contains a hyphen ( - ), the Distributed
AP configuration displayed
DWS-1008.
Serial ID of the Distributed AP.
System IP address
AP is configured. A separate row of output is displayed for each
DWS-1008 on which the Distributed AP is configured.
Bias of the DWS-1008 for the Distributed AP:
• High
• Low
Bias
HIGH
LOW
LOW
HIGH
HIGH
LOW
LOW
HIGH
Description
in the row of
of the DWS-1008 on
output is on another
which the Distributed
1