D-Link DWS-1008 Cli Reference Manual page 244

clear dot1x bonded-period
Resets the Bonded Auth period to its default value.
Syntax: clear dot1x max-req
Defaults: The default bonded authentication period is 0 seconds.
Access: Enabled.
Examples: To reset the Bonded period to its default, type the following command:
DWS-1008# clear dot1x bonded-period
success: change accepted
See Also:
• set dot1x bonded-period
• show dot1x
clear dot1x max-req
Resets to the default setting the number of Extensible Authentication Protocol (EAP) requests
that the switch retransmits to a supplicant (client).
Syntax: clear dot1x max-req
Defaults: The default number is 20.
Access: Enabled.
Examples: To reset the number of 802.1X requests the switch can send to the default setting,
type the following command:
DWS-1008# clear dot1x max-req
success: change accepted
See Also:
• set dot1x max-req
• show dot1x
D-Link DWS-1008 CLI Manual 1