D-Link DWS-1008 Cli Reference Manual page 458

Examples: The following command changes the other-querier-present interval on VLAN orange
to 200 seconds:
DWS-1008# set igmp oqi 200 vlan orange
success: change accepted.
See Also:
• set igmp lmqi
• set igmp qi
• set igmp qri
• set igmp querier
• set igmp mrouter
• set igmp rv
set igmp proxy-report
Disables or reenables proxy reporting by a switch on one VLAN or all VLANs.
Syntax: set igmp proxy-report {enable | disable} [vlan vlan-id]
enable
disable
vlan vlan-id
Defaults: Proxy reporting is enabled on all VLANs by default.
Access: Enabled.
Usage: Proxy reporting reduces multicast overhead by sending only one membership report for
a group to the multicast routers and discarding other membership reports for the same group.
If you disable proxy reporting, the switch sends all membership reports to the routers, including
multiple reports for the same group.
Examples: The following example disables proxy reporting on VLAN orange:
DWS-1008# set igmp proxy-report disable vlan orange
success: change accepted.
See Also:
• show igmp
D-Link DWS-1008 CLI Manual
Enables proxy reporting.
Disables proxy reporting.
VLAN name or number. If you do not specify a VLAN, proxy reporting is
disabled or reenabled on all VLANs.