Clear Rfdetect Ignore - D-Link DWS-1008 Cli Reference Manual

clear rfdetect attack-list
Removes a MAC address from the attack list.
Syntax: clear rfdetect attack-list mac-addr
mac-addr
Defaults: None.
Access: Enabled.
Examples: The following command clears MAC address 11:22:33:44:55:66 from the attack list:
DWS-1008# clear rfdetect attack-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer in attacklist.
See Also:
• set rfdetect attack-list
• show rfdetect attack-list

clear rfdetect ignore

Removes a device from the ignore list for RF scans. MSS does not generate log messages or
traps for the devices in the ignore list.
Syntax: clear rfdetect ignore mac-addr
mac-addr
Defaults: None.
Access: Enabled.
Examples: The following command removes BSSID aa:bb:cc:11:22:33 from the ignore list for
RF scans:
DWS-1008# clear rfdetect ignore aa:bb:cc:11:22:33
success: aa:bb:cc:11:22:33 is no longer ignored.
See Also:
• set rfdetect ignore
• show rfdetect ignore
D-Link DWS-1008 CLI Manual
MAC address you want to remove from the attack list.
Basic service set identifier (BSSID), which is a MAC address, of the device
to remove from the ignore list.
8