D-Link DWS-1008 Cli Reference Manual page 122

The table below describes the fields in this display.
Field
ARP aging time
Host
HW Address
VLAN
Type
State
See Also:
• set arp
• set arp agingtime
show dhcp-client
Displays DHCP client information for all VLANs.
Syntax: show dhcp-client
Defaults: None.
Access: All.
Examples: The following command displays DHCP client information:
DWS-1008# show dhcp-client
Interface:
Configuration Status:
DHCP State:
Lease Allocation:
Lease Remaining:
IP Address:
Subnet Mask:
Default Gateway:
DHCP Server:
DNS Servers:
DNS Domain Name:
D-Link DWS-1008 CLI Manual
Number of seconds a dynamic entry can remain unused before MSS removes the entry
from the ARP table.
IP address, hostname, or alias.
MAC address mapped to the IP address, hostname, or alias.
VLAN the entry is for.
Entry type:
• DYNAMIC—Entry was learned from network traffic and ages out if unused for longer
than the ARP aging timeout.
• LOCAL—Entry for the switch MAC address. Each VLAN has one local entry for the
switch MAC address.
• PERMANENT—Entry does not age out and remains in the configuration even following
a reboot.
• STATIC—Entry does not age out but is removed after a reboot.
Entry state:
• RESOLVING—MSS sent an ARP request for the entry and is waiting for the reply.
• RESOLVED—Entry is resolved.
corpvlan(4)
Enabled
IF_UP
65535 seconds
65532 seconds
10.3.1.110
255.255.255.0
10.3.1.1
10.3.1.4
10.3.1.29
mycorp.com
Description
11