D-Link DWS-1008 Cli Reference Manual page 288

Examples: The following command tests the RF link between the switch and the client with MAC
address 00:0e:9b:bf:ad:13:
DWS-1008# test rflink mac 00:0e:9b:bf:ad:13
RF-Link Test to 00:0e:9b:bf:ad:13 :
Session-Id: 2
Packets Sent
------------
20
The table below describes the fields in this display.
Field
Packets Sent
Packets Rcvd
RSSI
SNR
RTT (micro-secs)
See Also:
• show show rfdetect data
• show rfdetect visible
D-Link DWS-1008 CLI Manual
Packets Rcvd
------------
20
The number of test packets sent from the switch to the client.
The number of test packets acknowledged by the client.
Received signal strength indication (RSSI)—the strength of the RF signal from the
client, in decibels referred to 1 milliwatt (dBm).
Signal-to-noise ratio (SNR), in decibels (dB), of the data received from the client.
The round-trip time, in microseconds, for the client response to the test packets.
RSSI SNR RTT (micro-secs)
------- ----- ----------------
-68 26
Description
976
8