Clear Spantree Statistics - D-Link DWS-1008 Cli Reference Manual

Defaults: None.
Access: Enabled.
Usage: MSS does not change a port's priority for VLANs other than the one(s) you specify.
Examples: The following command resets the STP priority for port 5 in VLAN avocado:
DWS-1008# clear spantree portvlanpri 5 vlan avocado
success: change accepted.
See Also:
• clear spantree portpri
• set spantree portpri
• set spantree portvlanpri
• show spantree

clear spantree statistics

Clears STP statistics counters for a network port or ports and resets them to 0.
Syntax: clear spantree statistics port-list [vlan vlan-id]
port-list List of ports. Statistics counters are reset on the specified ports.
vlan vlan-id VLAN name or number. MSS resets statistics counters for only the specified
VLAN.
Defaults: None.
Access: Enabled.
Examples: The following command clears STP statistics counters for ports 1 and 4 through 6 for
all VLANs:
DWS-1008# clear spantree statistics 1,4-6
success: change accepted.
See Also:
• show spantree statistics
D-Link DWS-1008 CLI Manual 1