Show Port Counters - D-Link DWS-1008 Cli Reference Manual

show port counters

Displays port statistics.
Syntax: show port counters [octets | packets | receive-errors | transmit-errors |
collisions | receive-etherstats | transmit-etherstats] [port port-list]
octets
packets
receive-errors
transmit-errors
collisions
receive-etherstats
transmit-etherstats
port port-list
Defaults: None.
Access: All.
Usage: You can specify one statistic type with the command.
Examples: The following command shows octet statistics for port 3:
DWS-1008> show port counters octets port 3
Port Status
====================================
3 Up
This command's output has the same fields as the monitor port counters command.
See Also:
• clear port counters
• monitor port counters
D-Link DWS-1008 CLI Manual
Displays octet statistics.
Displays packet statistics.
Displays errors in received packets.
Displays errors in transmitted packets.
Displays collision statistics.
Displays Ethernet statistics for received packets.
Displays Ethernet statistics for transmitted packets.
List of physical ports. If you do not specify a port list, MSS displays
statistics for all ports.
Rx Octets Tx Octets
27965420 34886544