Show Version - D-Link DWS-1008 Cli Reference Manual
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Product manual (502 pages) ,
- User manual (454 pages) ,
- Cli reference manual (406 pages)
Table of Contents
Advertisement
If you do not specify a configuration area, nondefault information for all areas is displayed.
all
Defaults: None.
Access: Enabled.
Usage: If you do not use one of the optional parameters, configuration commands that set
nondefault values are displayed for all configuration areas. If you specify an area, commands
are displayed for that area only. If you use the all option, the display also includes commands for
configuration items that are set to their default values.
Examples: The following command shows configuration information for VLANs:
DWS-1008# show config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model switch
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also:
• load config
• save config
show version
Displays software and hardware version information for a switch and, optionally, for any attached
access points.
Syntax: show version [details]
details
Defaults: None.
Access: All.
D-Link DWS-1008 CLI Manual
•
spantree
•
system
•
trace
•
vlan
•
vlan-fdb
Includes configuration items that are set to their default values.
Includes additional software build information and information about
the AP access points configured on the switch.
0
Advertisement
Table of Contents
