D-Link DWS-1008 Cli Reference Manual page 364

the service profile rnd_lab to web-portal:
DWS-1008# set service-profile rnd_lab auth-fallthru web-portal
success: change accepted.
See Also:
• set web-portal
• set service-profile web-portal-form
• show service-profile
set service-profile auth-psk
Enables preshared key (PSK) authentication of Wi-Fi Protected Access (WPA) clients by AP radios
in a radio profile, when the WPA information element (IE) is enabled in the service profile.
Syntax: set service-profile name auth-psk {enable | disable}
name
Service profile name.
enable
Enables PSK authentication of WPA clients.
disable
Disables PSK authentication of WPA clients.
Defaults: When the WPA IE is enabled, PSK authentication of WPA clients is enabled by default.
If the WPA IE is disabled, the auth-psk setting has no effect.
Access: Enabled.
Usage: This command affects authentication of WPA clients only.
To use PSK authentication, you also must configure a passphrase or key. In addition, you must
enable the WPA IE.
Examples: The following command enables PSK authentication for service profile wpa_clients:
DWS-1008# set service-profile wpa_clients auth-psk enable
success: change accepted.
See Also:
• set service-profile auth-dot1x
• set service-profile psk-raw 7
• set service-profile wpa-ie
• show service-profile
D-Link DWS-1008 CLI Manual 1