Show Igmp Statistics - D-Link DWS-1008 Cli Reference Manual

The following command lists all receivers for multicast groups 237.255.255.1 through
237.255.255.255, in all VLANs:
DWS-1008# show igmp receiver-table group 237.255.255.0/24
VLAN: red
Session
---------------------------------------------------------------------------------------
237.255.255.2
237.255.255.119
VLAN: green
Session
---------------------------------------------------------------------------------------
237.255.255.17
237.255.255.255
The table below describes the fields in this display.
Field
VLAN
Session
Port
Receiver-IP
Receiver-MAC
TTL
See Also:
• set igmp receiver

show igmp statistics

Displays IGMP statistics.
Syntax: show igmp statistics [vlan vlan-id]
vlan vlan-id
Defaults: None.
Access: All.
D-Link DWS-1008 CLI Manual
Port Receiver-IP Receiver-MAC
2 10.10.20.19 00:02:04:06:09:0d 112
3 10.10.30.31 00:02:04:06:01:0b 112
Port Receiver-IP Receiver-MAC
11 10.10.40.41 00:02:06:08:02:0c 12
6 10.10.60.61 00:05:09:0c:0a:01 111
VLAN that contains the multicast receiver ports. Ports are listed separately for each VLAN.
IP address of the multicast group being received.
Physical port through which the switch can reach the receiver.
IP address of the receiver.
MAC address of the receiver.
Number of seconds before this entry ages out if the switch does not receive a group membership
message from the receiver. For static multicast receiver entries, the TTL value is undef. Static
multicast receiver entries do not age out.
VLAN name or number. If you do not specify a VLAN, MSS displays IGMP
statistics for all VLANs.
TTL
TTL
Description