D-Link DWS-1008 Cli Reference Manual page 376

Defaults: Proxy ARP is disabled by default.
Access: Enabled.
Usage: To further reduce broadcast traffic on a service profile, use the set service-profile no-
broadcast command to disable DHCP and ARP request broadcasts.
Examples: The following command enables proxy ARP on service profile sp1:
DWS-1008# set service-profile sp1 proxy-arp enable
success: change accepted.
See Also:
• set service-profile dhcp-restrict
• set service-profile no-broadcast
• show service-profile
set service-profile psk-phrase
Configures a passphrase for preshared key (PSK) authentication to use for authenticating WPA
clients, in a service profile. Radios use the PSK as a pairwise master key (PMK) to derive unique
pairwise session keys for individual WPA clients.
Syntax: set service-profile name psk-phrase passphrase
name
passphrase
Defaults: None.
Access: Enabled.
Usage: MSS converts the passphrase into a 256-bit binary number for system use and a raw
hexadecimal key to store in the DWS-1008's configuration. Neither the binary number nor the
passphrase itself is ever displayed in the configuration.
To use PSK authentication, you must enable it and you also must enable the WPA IE.
D-Link DWS-1008 CLI Manual
Service profile name.
An ASCII string from 8 to 63 characters long. The string can contain blanks if
you use quotation marks at the beginning and end of the string.