D-Link DWS-1008 Cli Reference Manual page 349

Defaults: The default maximum receive threshold for DWL-8220AP radios is 2000ms
(2 seconds).
Access: Enabled.
Usage: You must disable all radios that are using a radio profile before you can change parameters
in the profile. Use the set radio-profile mode command.
Examples: The following command changes the maximum transmit threshold for radio profile
rp1 to 4000 ms:
DWS-1008# set radio-profile rp1 max-tx-lifetime 4000
success: change accepted.
See Also:
• set radio-profile mode
• set radio-profile max-tx-lifetime
• show radio-profile
set radio-profile mode
Creates a new radio profile, or disables or reenables all DWL-8220AP radios that are using a
specific profile.
Syntax: set radio-profile name [mode {enable | disable}]
radio-profile name
mode enable
mode disable
Defaults: Each radio profile that you create has a set of properties with factory default values
that you can change with the other set radio-profile commands in this chapter.
D-Link DWS-1008 CLI Manual
Radio profile name of up to 16 alphanumeric characters, with no
spaces.
Use this command without the mode enable or mode disable option to
create a new profile.
Enables the radios that use this profile.
Disables the radios that use this profile.