traceroute
Traces the route to an IP host.
Syntax: traceroute host [dnf] [no-dns] [port port-num]
[queries num] [size size] [ttl hops] [wait ms]
host
dnf
no-dns
port port-num
queries num
size size
ttl hops
wait ms
Defaults:
• dnf—Disabled
• no-dns—Disabled
• port—33434
• queries—3
• size—38
• ttl—30
• wait—5000
Access: All.
Usage: To stop a traceroute command that is in progress, press Ctrl+C.
Examples: The following example traces the route to host server1:
DWS-1008# traceroute server1
traceroute to server1.example.com (192.168.22.7), 30 hops max, 38 byte packets
1 engineering-1.example.com (192.168.192.206) 2 ms 1 ms 1 ms
2 engineering-2.example.com (192.168.196.204) 2 ms 3 ms 2 ms
3 gateway_a.example.com (192.168.1.201) 6 ms 3 ms 3 ms
4 server1.example.com (192.168.22.7) 3 ms * 2 ms
D-Link DWS-1008 CLI Manual
IP address, hostname, or alias of the destination host. Specify the IP
address in dotted decimal notation.
Sets the Do Not Fragment bit in the ping packet to prevent the packet from
being fragmented.
Prevents MSS from performing a DNS lookup for each hop to the
destination host.
TCP port number listening for the traceroute probes.
Number of probes per hop.
Probe packet size in bytes. You can specify from 40 through 1460.
Maximum number of hops, which can be from 1 through 255.
Probe wait in milliseconds. You can specify from 1 through 100,000.
18