Set Server Group - D-Link DWS-1008 Cli Reference Manual

set server group

Configures a group of one to four RADIUS servers.
Syntax: set server group group-name members server-name1 [server-name2]
[server-name3] [server-name4]
group-name
members
server-name1
server-name2
server-name3
server-name4
Defaults: None.
Access: Enabled.
Usage: You must assign all group members simultaneously, as shown in the example. To enable
load balancing, use set server group load-balance enable.
Do not use the same name for a RADIUS server and a RADIUS server group.
Examples: To set server group shorebirds with members heron, egret, and sandpiper, type the
following command:
DWS-1008# set server group shorebirds members heron egret sandpiper
success: change accepted.
See Also:
• clear server group
• set server group load-balance
• show aaa
D-Link DWS-1008 CLI Manual
Server group name of up to 32 characters, with no spaces or tabs.
The names of one or more configured RADIUS servers.
You can enter up to four server names.
8