Understanding Command Descriptions - D-Link DWS-1008 Cli Reference Manual

Understanding Command Descriptions

Each command description in the D-Link Command Reference contains the following elements:
• A command name, which shows the keywords but not the variables. For example, the following
command name appears at the top of a command description and in the index:
set {ap | dap} name
The set {ap | dap} name command has the following complete syntax:
set {ap port-list | dap dap-num} name name
• A brief description of the command's functions.
• The full command syntax.
• Any command defaults.
• The command access, which is either enabled or all.
All indicates that anyone can access this command.
Enabled indicates that you must enter the enable password before entering the
command.
• The command history, which identifies the MSS version in which the command was introduced
and the version numbers of any subsequent updates.
D-Link DWS-1008 CLI Manual 11