Clear Accounting - D-Link DWS-1008 Cli Reference Manual

clear accounting

Removes accounting services for specified wireless users with administrative access or network
access.
Syntax: clear accounting {admin | dot1x | system} {user-glob}
admin
Users with administrative access to the switch through a console connection or
through a Telnet or Web View connection.
dot1x
Users with network access through the switch. Users with network access are
authorized to use the network through either an IEEE 802.1X method or
their media access control (MAC) address.
system
Disables sending of Accounting-On and Accounting-Off messages to a RADIUS
server, if previously enabled. When this command is entered, an Accounting-Off
message is generated and sent to the server or server group specified with
the set accounting system command.
user-glob Single user or set of users with administrative access or network access.
Specify a username, use the double-asterisk wildcard character (**) to specify all
usernames, or use the single-asterisk wildcard character (*) to specify a set of
usernames up to or following the first delimiter character— either an at sign
(@) or a period (.).
Defaults: None.
Access: Enabled.
Examples: The following command removes accounting services for authorized network user
Nin:
DWS-1008# clear accounting dot1x Nin
success: change accepted.
See Also:
• set accounting {admin | console}
• set accounting system
• show accounting statistics
D-Link DWS-1008 CLI Manual 11