D-Link DWS-1008 Cli Reference Manual page 129

set ip alias
Configures an alias, which maps a name to an IP address. You can use aliases as shortcuts in
CLI commands.
Syntax: set ip alias name ip-addr
name String of up to 32 alphanumeric characters, with no spaces.
ip-addr IP address in dotted decimal notation.
Defaults: None.
Access: Enabled.
Examples: The following command configures the alias HR1 for IP address 192.168.1.2:
DWS-1008# set ip alias HR1 192.168.1.2
success: change accepted.
See Also:
• clear ip alias
• show ip alias
set ip dns
Enables or disables DNS on a DWS-1008 switch.
Syntax: set ip dns {enable | disable}
enable
Enables DNS.
disable Disables DNS.
Defaults: DNS is disabled by default.
Access: Enabled.
Examples: The following command enables DNS on a DWS-1008 switch:
DWS-1008# set ip dns enable
Start DNS Client
See Also:
• clear ip dns domain
• clear ip dns server
• set ip dns domain
• set ip dns server
• show ip dns
D-Link DWS-1008 CLI Manual 1