D-Link DWS-1008 Cli Reference Manual page 419

Examples: The following command displays static IP configuration information for Distributed
AP 1:
DWS-1008# show dap boot-configuration 1
Static Boot Configuration
DAP: 1
IP Address: Disabled
VLAN Tag:
Switch:
IP Address:
Netmask:
Gateway:
VLAN Tag:
Switch IP:
Switch Name:
DNS IP:
The following table describes the fields in the display:
Field
DAP
IP Address
VLAN Tag
Switch
IP Address
Netmask
Gateway
Vlan Tag
Switch IP
Switch Name
DNS IP
D-Link DWS-1008 CLI Manual
Disabled
Disabled
Distributed AP number.
Whether static IP address assignment is enabled for this Distributed AP.
Whether the Distributed AP is configured to use a VLAN tag.
Whether the Distributed AP is configured to use a manually specified DWS-
1008 as its boot device.
The static IP address assigned to this Distributed AP.
The subnet mask assigned to this Distributed AP.
The IP address of the default gateway assigned to this Distributed AP.
The VLAN tag that the Distributed AP is configured to use (if any).
The IP address of the DWS-1008 that this Distributed AP is configured to use
as its boot device (if any).
The name of the DWS-1008 that this Distributed AP is configured to use as its
boot device (if any).
The IP address of the DNS server that the Distributed AP uses to resolve the
name of the DWS-1008 used as its boot device.
Description
1