D-Link DWS-1008 Cli Reference Manual page 131

Defaults: None.
Access: Enabled.
Usage: You can configure a switch to use one primary DNS server and up to five secondary DNS
servers.
Examples: The following commands configure a switch to use a primary DNS server and two
secondary DNS servers:
DWS-1008# set ip dns server 10.10.10.50/24 primary
success: change accepted.
DWS-1008# set ip dns server 10.10.20.69/24 secondary
success: change accepted.
DWS-1008# set ip dns server 10.10.30.69/24 secondary
success: change accepted.
See Also:
• clear ip dns domain
• clear ip dns server
• set ip dns
• set ip dns domain
• show ip dns
set ip https server
Enables the HTTPS server on a DWS-1008 switch. The HTTPS server is required for Web View
access to the switch.
Caution: If you disable the HTTPS server, Web View access to the switch is disabled.
Syntax: set ip https server {enable | disable}
enable Enables the HTTPS server.
disable
Disables the HTTPS server.
Defaults: The HTTPS server is disabled by default.
Access: Enabled.
Examples: The following command enables the HTTPS server on a switch:
DWS-1008# set ip https server enable
success: change accepted.
D-Link DWS-1008 CLI Manual 18