Clear Spantree Portvlancost; Clear Spantree Portvlanpri - D-Link DWS-1008 Cli Reference Manual

clear spantree portvlancost

Resets to the default value the cost of a network port or ports on paths to the STP root bridge for
a specific VLAN on a DWS-1008 switch, or for all VLANs.
Syntax: clear spantree portvlancost port-list {all | vlan vlan-id}
port-list List of ports. The port cost is reset on the specified ports.
all
Resets the cost for all VLANs.
vlan vlan-id VLAN name or number. MSS resets the cost for only the specified VLAN.
Defaults: None.
Access: Enabled.
Usage: MSS does not change a port's cost for VLANs other than the one(s) you specify.
Examples: The following command resets the STP cost for port 12 in VLAN sunflower:
DWS-1008# clear spantree portvlancost 12 vlan sunflower
success: change accepted.
See Also:
• clear spantree portcost
• set spantree portcost
• set spantree portvlancost
• show spantree
• show spantree portvlancost

clear spantree portvlanpri

Resets to the default value the priority of a network port or ports for selection as part of the path
to the STP root bridge, on one VLAN or all VLANs.
Syntax: clear spantree portvlanpri port-list {all | vlan vlan-id}
port-list List of ports. The port priority is reset to 32 (the default) on the specified ports.
all
Resets the priority for all VLANs.
vlan vlan-id VLAN name or number. MSS resets the priority for only the specified VLAN.
D-Link DWS-1008 CLI Manual 0