Pre-Login Banner, System Prompt, And Host Name Commands - D-Link 5000 Series Cli Reference Manual

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Parameters
scriptname
Default
The default is None.
Command Mode
Privileged EXEC
4-156 script validate
This command is used to validate a script file through parsing of each line in the script file, with the
scriptname parameter indicating the name of the script to be validated. The validate option is meant to
provide assistance in script development, as the validation is intended to identify any potential problems.
That said, it may not be successful in identifying all problems for a given script on every device.
script validate scriptname
Parameters
scriptname
Default
The default is None.
Command Mode
Privileged EXEC
Pre-login Banner, System Prompt, and Host Name
Commands
In this section, the commands used to configure the system prompt and the pre-login banner are
described. The pre-login banner consists of the text that is displayed before the user logs in at the User:
prompt.
4-157 copy (pre-login banner)
The option to upload or download the CLI Banner to or from the switch is included in the copy command.
Local URLs can be specified by using FTP, TFTP, SFTP, SCP, or Xmodem.
copy <tftp : //<ipaddr>/<filepath>/<filename>> nvram:clibanner
Indicaes the file name of the configuration script.
Indicates the file name of the configuration script.
130