D-Link DWS-1008 Cli Reference Manual page 327

set {ap | dap} location
Specifies location information for an AP.
Syntax: set {ap port-list | dap {dap-num} location string
ap port-list
dap dap-num
location string
Defaults: None.
Access: Enabled
Usage: Use this command to specify information about the location of the AP.
Examples: The following command specifies the location of AP 7 as The conference room.
DWS-1008# set ap 7 location 'The conference room'
success: change accepted.
See Also:
• show {ap | dap} config
• set {ap | dap} contact
D-Link DWS-1008 CLI Manual
List of ports on which to specify location information for directly connected
APs.
Number of a Distributed AP for which to specify location information.
Location information for the AP. If the location information includes spaces,
enclose the string in quotes.