D-Link DWS-1008 Cli Reference Manual page 530

test
Displays or changes the state of the poweron test flag. The poweron test flag controls whether an
performs a set of self tests prior to the boot process.
Syntax: test [ON | on | OFF | off]
ON
Enables the poweron test flag.
on
Same effect as ON.
OFF
Disables the poweron test flag.
off
Same effect as OFF.
Defaults: The poweron test flag is disabled by default.
Access: Boot prompt.
Examples: The following command displays the current setting of the poweron test flag:
boot> test
The diagnostic execution flag is not set.
See Also:
• boot
version
Displays version information for a switch's hardware and boot code.
Syntax: version
Defaults: None.
Access: Boot prompt.
Usage: This command does not list the system image file versions installed in the boot partitions.
To display system image file versions, use the dir or fver command.
D-Link DWS-1008 CLI Manual