D-Link DWS-1008 Cli Reference Manual page 348

set radio-profile max-rx-lifetime
Changes the maximum receive threshold for the DWL-8220AP radios in a radio profile. The
maximum receive threshold specifies the number of milliseconds that a frame received by a radio
can remain in buffer memory.
Syntax: set radio-profile name max-rx-lifetime time
name
time
Defaults: The default maximum receive threshold for DWL-8220AP radios is 2000ms
(2 seconds).
Access: Enabled.
Usage: You must disable all radios that are using a radio profile before you can change parameters
in the profile. Use the set radio-profile mode command.
Examples: The following command changes the maximum receive threshold for radio profile
rp1 to 4000 ms:
DWS-1008# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
See Also:
• set radio-profile mode
• set radio-profile max-tx-lifetime
• show radio-profile
set radio-profile max-tx-lifetime
Changes the maximum transmit threshold for the DWL-8220AP radios in a radio profile. The
maximum transmit threshold specifies the number of milliseconds that a frame scheduled to be
transmitted by a radio can remain in buffer memory.
Syntax: set radio-profile name max-tx-lifetime time
name Radio profile name.
time Number of milliseconds. You can enter a value from 500 (0.5 second) through
250,000 (250 seconds).
D-Link DWS-1008 CLI Manual
Radio profile name.
Number of milliseconds. You can enter a value from 500 (0.5 second) through
250,000 (250 seconds).