Clear Snmp Notify Target; Clear Snmp Usm - D-Link DWS-1008 Cli Reference Manual

clear snmp notify target

Clears an SNMP notification target.
Syntax: clear snmp notify target target-num
target-num
Defaults: None.
Access: Enabled.
Examples: The following command clears notification target 3:
DWS-1008# clear snmp notify target 3
success: change accepted.
See Also:
• set snmp notify target
• show snmp notify target

clear snmp usm

Clears an SNMPv3 user.
Syntax: clear snmp usm usm-username
usm-username
Defaults: None.
Access: Enabled.
Examples: The following command clears SNMPv3 user snmpmgr1:
DWS-1008# clear snmp usm snmpmgr1
success: change accepted.
See Also:
• set snmp usm
• show snmp usm
D-Link DWS-1008 CLI Manual
ID of the target.
Name of the SNMPv3 user you want to clear.
8