Clear Trace - D-Link DWS-1008 Cli Reference Manual

clear trace

Deletes running trace commands and ends trace processes.
Syntax: clear trace {trace-area | all}
trace-area
Defaults: None.
Access: Enabled.
Examples: To clear all trace processes, type the following command:
DWS-1008# clear trace all
success: clear trace all
To clear the session manager trace, type the following command:
DWS-1008# clear trace sm
success: clear trace sm
See Also:
• set trace authentication
• set trace authorization
• set trace dot1x
• set trace sm
• show trace
D-Link DWS-1008 CLI Manual
Ends a particular trace process. Specify one of the following keywords to end
the traces documented in this chapter:
• authorization—Ends an authorization trace
• dot1x—Ends an 802.1X trace
• authentication—Ends an authentication trace
• sm—Ends a session manager trace all Ends all trace processes.
1