Cli Conventions; Command Prompts - D-Link DWS-1008 Cli Reference Manual

8 port 10/100 wireless switch with power over ethernet

Hide thumbs Also See for DWS-1008:

Table of Contents

Be aware of the following MSS CLI conventions for command entry:

• "Command Prompts" on page 3

• "Syntax: Notation" on page 4

• "Text Entry Conventions and Allowed Characters" on page 4

• "User Globs, MAC Address Globs, and VLAN Globs" on page 6

• "Port Lists" on page 8

By default, the MSS CLI provides the following prompt for restricted users. The mmmm portion shows

the DWS switch model number (for example, 1008) and the nnnnnn portion shows the last 6 digits of

the switch's media access control (MAC) address.

DWS-mmmm-nnnnnn>

After you become enabled as an administrative user by typing enable and supplying a suitable password,

MSS displays the following prompt:

DWS-mmmm-nnnnnn#

For ease of presentation, this manual shows the restricted and enabled prompts as follows:

For information about changing the CLI prompt on an DWS switch, see set prompt on page 22.

D-Link DWS-1008 CLI Manual

CLI Conventions