D-Link DWS-1008 Cli Reference Manual page 208

set mac-usergroup attr
Creates a user group in the local database on the switch for users who are authenticated by a
MAC address, and assigns authorization attributes for the group.
(To configure a user group and assign authorization attributes through RADIUS, see the
documentation for your RADIUS server.)
Syntax: set mac-usergroup group-name attr attribute-name value
group-name
attribute-name value
Defaults: None.
Access: Enabled.
Usage: To change the value of an attribute, enter set mac-usergroup attr with the new value. To
delete an attribute, use clear mac-usergroup attr.
You can assign attributes to individual MAC users and to MAC user groups. If attributes are
configured for a MAC user and also for the group the MAC user is in, the attributes assigned to
the individual MAC user take precedence for that user. For example, if the start-date attribute
configured for a MAC user is sooner than the start-date configured for the MAC user group the
user is in, the MAC user's network access can begin as soon as the user start-date. The MAC
user does not need to wait for the MAC user group's start date.
Examples: The following command creates the MAC user group eastcoasters and assigns the
group members to VLAN orange:
DWS-1008# set mac-usergroup eastcoasters attr vlan-name orange
success: change accepted.
See Also:
• clear mac-usergroup attr
• show aaa
D-Link DWS-1008 CLI Manual
Name of a MAC user group. Specify a name of up to 32 alphanumeric
characters, with no spaces. The name must begin with an alphabetic
character.
Name and value of an attribute you are using to authorize all MAC
users in the group for a particular service or session characteristic.
0