D-Link DWS-1008 Cli Reference Manual page 526

next
Activates and displays the boot profile in the next boot profile slot.
Syntax: next
Defaults: None.
Access: Boot prompt.
Usage: A DWS-1008 switch contains 4 boot profile slots, numbered 0 through 3. This command
activates the boot profile in the next slot, in ascending numerical order.
If the currently active slot is 3, the command activates the boot profile in slot 0.
Examples: To activate the boot profile in the next slot and display the profile, type the following
command:
boot> next
BOOT Index:
BOOT TYPE:
DEVICE:
FILENAME:
FLAGS:
OPTIONS:
See Also:
• change
• create
• delete
• show
D-Link DWS-1008 CLI Manual
0
c
boot1:
testcfg
00000000
run=nos;boot=0