D-Link DWS-1008 Cli Reference Manual page 279

Examples: The following command shows information about all wireless clients detected by a
switch's APs:
DWS-1008# show rfdetect clients
Total number of entries: 30
Client MAC
-----------------
00:03:7f:bf:16:70
00:04:23:77:e6:e5 Intel
00:05:5d:79:ce:0f
00:05:5d:7e:96:a7 D-Link
00:05:5d:7e:96:ce D-Link
00:05:5d:84:d1:c5 D-Link
The following command displays more details about a specific client:
DWS-1008# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys Port: dap 1, Radio: 1, Channel:
11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: D-Link, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about the most recent
802.11 packet detected from the client.
show rfdetect clients Output
Field
Client MAC
Client Vendor
AP MAC
AP Vendor
Port/Radio/Channel Port number, radio number, and channel number of the radio that detected
NoL
D-Link DWS-1008 CLI Manual
Client AP MAC
Vendor
------- ----------------- ------- -------------
Unknown Unknown
Unknown
D-Link Unknown
Unknown
Unknown
Unknown
Description
MAC address of the client.
Company that manufactures or sells the client.
MAC address of the radio with which the rogue client is associated.
Company that manufactures or sells the AP with which the rogue client is
associated.
the rogue. For a Distributed AP, the connection number is labeled dap.
(This stands for distributed ap.)
Number of listeners. This is the number of AP radios that detected the
rogue client.
AP Port/Radio
Vendor /Channel
dap 1/1/6
dap 1/1/2
dap1/1/149 1
dap1/1/149 1
dap1/1/157 1
dap 1/1/1
NoL Type Last
seen
--- ----- ----
1 intfr 207
1 intfr 155
intfr 87
intfr 117
intfr 162
1 intfr 52