Show Spantree Portfast - D-Link DWS-1008 Cli Reference Manual

show spantree portfast

Displays STP uplink fast convergence information for all network ports or for one or more network
ports.
Syntax: show spantree portfast [port-list]
port-list List of ports. If you do not specify any ports, MSS displays uplink fast convergence
information for all ports.
Defaults: None.
Access: All.
Examples: The following command shows uplink fast convergence information for all ports:
DWS-1008# show spantree portfast
Port Vlan
---------------------------------------
1 1
2 1
3 1
4 1
5 2
6 2
7 2
8 2
The table below describes the fields in this display.
See Also:
• set spantree portfast
D-Link DWS-1008 CLI Manual
Portfast
disable
disable
disable
enable
disable
disable
disable
disable
Field
Port Port number.
VLAN VLAN number.
State of the uplink fast convergence feature:
Portfast • Enable
• Disable
Description