D-Link DWS-1008 Cli Reference Manual page 66

8 port 10/100 wireless switch with power over ethernet

Hide thumbs Also See for DWS-1008:

Table of Contents

Defaults: None.

Access: Enabled.

Usage: If you do not specify a port-list, the entire VLAN is removed from the configuration.

Note: You cannot delete the default VLAN but you can remove ports from it. To remove ports from

the default VLAN, use the port port-list option.

Examples: The following command removes port 1 from VLAN green:

DWS-1008# clear vlan green port 1

This may disrupt user connectivity. Do you wish to continue? (y/n) [n]y

success: change accepted.

The following command removes port 4, which uses tag value 69, from VLAN red:

DWS-1008# clear vlan red port 4 tag 69

This may disrupt user connectivity. Do you wish to continue? (y/n) [n]y

success: change accepted.

The following command completely removes VLAN marigold:

DWS-1008# clear vlan marigold

This may disrupt user connectivity. Do you wish to continue? (y/n) [n]y

success: change accepted.