Set Snmp Community - D-Link DWS-1008 Cli Reference Manual

set snmp community

Configures a community string for SNMPv1 or SNMPv2c.
Note: For SNMPv3, use the set snmp usm command to configure an SNMPv3 user. SNMPv3
does not use community strings.
Syntax: set snmp community name comm-string access {read-only | read-notify |
notify-only | read-write | notify-read-write}
comm-string
read-only
read-notify
notify-only
read-write
notify-read-write
Defaults: None.
Access: Enabled.
Usage: SNMP community strings are passed as clear text in SNMPv1 and SNMPv2c. D-Link
recommends that you use strings that cannot easily be guessed by unauthorized users. For
example, do not use the well-known strings public and private.
If you are using SNMPv3, you can configure SNMPv3 users to use authentication and to encrypt
SNMP data.
D-Link DWS-1008 CLI Manual
Name of the SNMP community. Specify between 1 and 32 alphanumeric
characters, with no spaces.
Allows an SNMP management application using the string to get (read)
object values on the switch but not to set (write) them.
Allows an SNMP management application using the string to get object
values on the switch but not to set them. The switch can use the string to
send notifications.
Allows the switch to use the string to send notifications.
Allows an SNMP management application using the string to get and set
object values on the switch.
Allows an SNMP management application using the string to get and set
object values on the switch. The switch also can use the string to send
notifications.
10