D-Link DWS-1008 Cli Reference Manual page 159

Field
Lease Remaining
IP Address
Subnet Mask
Default Router
DNS Servers
DNS Domain Name
show interface
Displays the IP interfaces configured on the switch.
Syntax: show interface [vlan-id]
vlan-id VLAN name or number.
Defaults: If you do not specify a VLAN ID, interfaces for all VLANs are displayed.
Access: All
Usage: The IP interface table flags an address assigned by a DHCP server with an asterisk (*).
Examples: The following command displays all the IP interfaces configured on a switch:
DWS-1008# show interface
VLAN Name
--------------------------------------------------------------------------------------------------------------
1 default
2 mauve
4 corpvlan
The table below describes the fields in this display.
Field
VLAN
Name
Address
Mask
Enabled
State
RIB
D-Link DWS-1008 CLI Manual
Number of seconds remaining before the address lease expires.
IP address leased to the client.
Network mask of the IP address leased to the client.
Default router IP address included in the DHCP Offer to the client.
DNS server IP address(es) included in the DHCP Offer to the client.
Default DNS domain name included in the DHCP Offer to the client.
Address
10.10.10.10 255.255.255.0
10.10.20.10 255.255.255.0
*10.3.1.110 255.255.255.0
VLAN number.
VLAN name.
IP address.
Subnet mask.
Administrative state:
• YES (enabled)
• NO (disabled)
Link state:
• Up (operational)
• Down (unavailable)
Routing Information Base
Description
Mask Enabled
YES
NO
YES
Description
State RIB
Up ipv4
Down ipv4
Up ipv4
1