D-Link DWS-1008 Cli Reference Manual page 384

set service-profile soda mode
Enables or disables Sygate On-Demand (SODA) functionality for a service profile.
Syntax: set service-profile name soda mode {enable | disable}
name
enable
disable
Defaults: Disabled.
Access: Enabled.
Usage: When SODA functionality is enabled for a service profile, a SODA agent is downloaded
to clients attempting to connect to an AP managed by the service profile. The SODA agent
performs a series of security-related checks on the client; if the client passes the checks, it can
be admitted to the network.
SODA functionality requires that Web Portal WebAAA also be enabled for the service profile.
Examples: The following command enables SODA functionality for service profile sp1:
DWS-1008# set service-profile sp1 soda mode enable
success: change accepted.
See Also:
• install soda agent
• set service-profile soda enforce-checks
• show service-profile
set service-profile soda remediation-acl
Specifies an ACL to be applied to a client if it fails the checks performed by the SODA agent.
Syntax: set service-profile name soda remediation-acl acl-name
name
acl-name
D-Link DWS-1008 CLI Manual
Service profile name.
Enables SODA functionality for the service profile.
Disables SODA functionality for the service profile.
Service profile name.
Name of an existing security ACL to use as a remediation ACL for this service
profile. ACL names must start with a letter and are case-insensitive.
81