D-Link DWS-1008 Cli Reference Manual page 313

See Also:
• set {ap | dap} radio radio-profile
• set radio-profile mode
• show {ap | dap} config
• show radio-profile
clear service-profile
Removes a service profile or resets one of the profile's parameters to its default value.
Syntax: clear service-profile name
[soda {agent-directory | failure-page | remediation-acl | success-page | logout-page}]
name Service profile name.
soda agent-directory
soda failure-page
soda remediation-acl
soda success-page
soda logout-page
Defaults: None
Access: Enabled
Usage: If the service profile is mapped to a radio profile, you must remove it from the radio
profile first. (After disabling all radios that use the radio profile, use the clear radio-profile name
service-profile name command.)
D-Link DWS-1008 CLI Manual
Resets the directory for Sygate On-Demand (SODA) agent files
to the default directory. By default, the directory name for SODA
agent files is the same as the service profile name.
Resets the page that is loaded when a client fails the checks
performed by the SODA agent. By default, the page is generated
dynamically.
Disables use of the specified remediation ACL for the service profile.
When no remediation ACL is specified, a client is disconnected
form the network when it fails SODA agent checks.
Resets the page that is loaded when a client passes the checks
performed by the SODA agent. By default, the page is generated
dynamically.
Resets the page that is loaded when a client logs out of the network.
By default, the client is disconnected from the network without a
page being loaded.
10